The information in this Training Manual should not be interpreted as a basis for warranty or goodwill claims against Nissan Motor Co. (Australia) Pty. Ltd. (NMA) unless so designated. This Technical Training Manual is intended for use by NMA & Nissan Dealership Technical Personnel. It is not designed for the use by press or for customer distribution. Before quoting any specifications be sure to check the relevant Service Manual and Technical Bulletins. Right for alteration to data and specifications at any time is reserved. Any such alterations will be advised by Nissan through Technical and Sales Bulletins.
Nissan Learnig Academy YD25DDTi Common Rail Diesel Engine
- R51 Pathfinder
- D40 Navara
- D22 Navara
ABOUT THIS TRAINING MANUAL
The purpose of this document is for Nissan Dealer Technical Staff self study purposes. If anything contained within this document gives any doubt, please contact Nissan via a Non Vehicle related TechLine enquiry to clarify the information contained within this document. The information in this Training Manual should not be interpreted as a basis for warranty or goodwill claims against Nissan Motor Co. (Australia) Pty. Ltd. (NMA) unless so designated
FUTURE UPDATE’S OF THIS TRAINING MANUAL?
Additional information will be collated & added to this document at a later date. When this does occur, a special amendment document will be published on the new Nissan Learning Academy. Log onto www.nissanlearningacademy.com.au for more detail or e-mail training@nissan.com.au This actual Training Manual will also be readily available at anytime for download & printing within each Nissan Dealership.
OTHER INFORMATION TO SUPPORT THIS TRAINING MANUAL
This Training Manual should be used in conjunction with the “2010 Diesel Particulate Filter” Training Manual.
- R51 Pathfinder: SM0E-1R51GE
- D40 produced in Spain: SM0E-1D40GE
- D40 produced in Thailand: SM8E-1D40G2
- D22 Navara: SM8E-5D22G1
These ESM s ’s have been automatically issued to all Nissan dealers (via the parts distribution system) If . (via the parts distribution system) If your dealership does not have any of them, they can be ordered via normal parts channels using the above quoted publication numbers.
This Training Manual is designed for the purpose of relaying information about the vehicle & the systems within it. This Training Manual is not to be used as the Service Manual. Throughout this Training Manual, references are made to the Service Manual for additional information regarding fault diagnosis, repairs &/or maintenance.
SERVICE TECHNICAL BULLETINS (STB’s)
Please ensure you familiarise yourselves with all STB’s relating to R51, D40 & D22 Once the screen where all STB’s are accessed is reached, click on the “by Model” link & then all the STB’s will be re sorted so that all the model code related STB’s are together.
GENERAL INFORMATION
D22 Navara ESM
This 1 x disc contains information for ALL D22 Navara’s produced since 1997. Care must be taken when using this disc as it contains information relevant to other countries as well as Australia.
Refer to the “SM list” on the iNISCOM Service Homepage. (Over on the LH side of the screen under “TechLine”) Ensure that this is the latest esm for D22! Publication Number (Part #) SM8E-5D22G1 (Correct as at May 2010)
Thailand D40 Navara ESM
This 1 x disc contains information for ALL Thai produced D40 Navara’s. Do NOT use this ESM for models produced in Spain. Refer to the “ESM LIST” on the iNISCOM Service Homepage. (Over on the LH side of the screen under “TechLine”) Ensure that this is the latest ESM for Thailand produced D40!
Spain D40 Navara ESM
This 1 x disc contains information for ALL Spain produced D40 Navara’s. Do not use this ESM for models produced in Thailand. Refer to the “ESM LIST” on iNISCOM Service Homepage. (Over on the LH side of the screen under “TechLine”) Ensure that this is the latest ESM for Spain produced D40!