Nissan 200SX model S13 series Maintenance Manual

Nissan 200SX model S13 series Maintenance Manual
Nissan 200SX

This manual contains maintenance and repair procedures for Nissan 200SX, model S13 series. In order to assure your safety and the efficient functioning of the vehicle, this manual should be read thoroughly. It is especially important that the PRECAUTIONS in the Gl section be completely understood before starting any repair task.

All information in this manual is based on the latest product information at the time of publication. The right is reserved to make changes in specifications and methods at any time without notice.

The proper performance of service is essential for both the safety of the technician and the efficient functioning of the vehicle. The service methods in this Service Manual are described in such a manner that the service may be performed safely and accurately. Service varies with the procedures used, the skills of the technician and the tools and parts available. Accordingly, anyone using service procedures, tools or parts which are not specifically recommended by NISSAN must first completely satisfy himself that neither his safety nor the vehicle's safety will be jeopardized by the service method selected.

Asbestos Safety Instructions (Based on regulations of United Kingdom)
This vehicle uses parts containing asbestos, most are not hazardous but Brake and Clutch linings can be. Consult the manufacturer or his agent for further details. When working with these please observe the “Garage Workers’ Asbestos Code” available through your Nissan Dealer, Local Authority or Health and Safety Executive. In particular, work in a well-ventilated place using where possible appropriate dust extraction equipment and avoid creating dust. Dampen all asbestos/dust where possible prior to machining, cutting, cleaning, etc. Use only hand or low speed tools. Dispose of all asbestos waste, wet rags, etc., in a closed container as directed by your local waste disposal authority.

CONTENTS:

  1. PRECAUTIONS Gl- 2
  2. HOW TO USE THIS MANUAL Gl- 5
  3. HOW TO READ WIRING DIAGRAMS ...... Gl- 7
  4. HOW TO FOLLOW FLOW CHART IN TROUBLE DIAGNOSES GI-10
  5. IDENTIFICATION INFORMATION GI-13
  6. LIFTING POINTS AND TOW TRUCK TOWING GI-17
  7. TIGHTENING TORQUE OF STANDARD BOLTS GI-20

0 comments

Leave a Reply

Your email address will not be published.Required fields are marked *