We appreciate your trust and your admission to the XCMG brand and used vehicle crane manufactured by XCMG Heavy Machinery s.L. This operation manual applies to QY70K-i (hydraulic control) vehicle crane, QY70KL.
This operation manual describes the operation, examination and adjustment method of the crane of the QY70K-i (hydraulic control) vehicle, XCMG QY70KL, (abbreviation is crane), and introduces the installation and transportation method, etc, of the crane aids. The lifting operation is a job that can have a risk, to ensure safe use, and while exercising the best function of the crane, before the operation, you must seriously read this manual please, so that you can skillfully know and use the contents in the manual and performs the operation strictly according to the requirements of the manual. the operator must note especially content marked “risk”, “warning”, “note” and “examination”.
Before manufacturing, the crane has passed the strict test, all control components have done the Strict adjustment, for safe use, you can not adjust as you like please.
Only the person who carries out the training and obtains the quality certificate Through the qualified exam you can operate this crane. It specifically notes that it carries out the periodic examination for the safety device of the crane, You must not use the crane improperly if the safety device has any fault or works extraordinarily.must meet the highest standard is that: safety first.
This operation manual and other technical documents attached to the vehicle are the components of the crane, during the life of use of the product it conserves appropriately with the vehicle. As the necessary basis of use and operation of this crane, our company assumes no responsibility, if you do not use the crane according to the operation of this manual producing the negative effects. In the special case, to ensure the operation of the crane, communicate with our company please, we can provide effective technical assistance and in weather.
The products of our company have passed the national identification "3C", to ensure the requirements "3C" product uniforms, during the repair and maintenance process, when the user change the main parts, you must adopt the parts that its code and manufacturer are similar to the product original, if not, our company does not assume the damages produced by this cause.
Our company reserves the right to continually modify the contents of the "Operation Manual" by the improvement of technology, if you have a change, please do not make a notification again, we hope that users can understand it. some figures and texts in this manual may not correspond to the product real possibly, but it does not affect its use, the state of the product depends on the state of the real thing.