Thank you for choosing Cargotec as your machine supplier. We hope that we'll meet your expectations. The instructions are based on the use of generally available standard tools. All lifting devices, for example, slings, straps, ratchet blocks, etc., must meet governing national standards and regulations for lifting devices. Cargotec will not accept any responsibility for modifications performed without permission from Cargotec or if other lifting devices, tools or work methods are used other than those described in this manual.
About the machine version
The information in this publication corresponds to the machine's design and appearance at the time of delivery from Cargotec. Due to customizations, there may be variations and/or deviations. Cargotec reserves the right to modify specifications and equipment without prior notice. All information and data in this manual are valid at the time of publication.
The Workshop Manual contains information to facilitate maintenance (part replacement) and is a supplement to the Maintenance Manual. The supplier documentation for engine, transmission and drive axle also supplements the Workshop Manual. If possible, the Workshop Manual provides reference to supplier documentation instead of printing the same information twice. Methods for preventive maintenance and certain checks are found in the Maintenance Manual; no references are given. Use the function groups to locate the information in the Maintenance Manual.
The maintenance manual and Workshop manual contain different information. The maintenance manual contains only the information needed for preventive maintenance and simpler troubleshooting. The Workshop manual contains more in-depth information and repair instructions.
The maintenance manual and workshop manual are mainly divided into function groups, see Workshop manual contents page 5. Certain parts are broken out as separate parts to increase usability, e.g., "Technical data".