⚠️ Please use a different browser such as Chrome, Safari, EDGE, or Firefox, without ad-blocking extensions, for the best experience.
⚠️ Please use a different browser such as Chrome, Safari, EDGE, or Firefox, without ad-blocking extensions, for the best experience.

Connector set airframe side (HICX3) for ROTAX Aircraft Engines

The connector set may be declared as part of the wiring harness on air- craft-side and so might not be a part of the Engine Type Design. Such a PAC part has been then tested and released by BRP-Rotax, but it might not be certified for the relevant engine type. In such a case the correct function in conjunction with the entire system is the responsibility of the aircraft manufacturer and must be carried out jointly with the aircraft.

Connector set airframe side (HICX3) for ROTAX Aircraft Engines

Reason
In the course of product maintenance and expansion of our spare parts program, connector set airframe side is available. Connector set airframe side (HIC/X3) for ROTAX® Aircraft Engines.

Material cost and availability
Price and availability will be provided on request by ROTAX® Authorized Distributors or their independent Service Centers.

Company support information
Any possible support by BRP-Rotax will be provided on request by ROTAX® Authorized Distributors or their independent Service Centers.

Parts requirement for installation of HIC A, HIC B and X3 connectors
Part no. Description Application
881240 Parts kit (connector set airframe side, HIC/X3) Wiring harness
864110 Contact pin male MX150L 1.31-2.06 mm² (16 - 14 AWG) HIC A (fuel pump wires), HIC B (fuel pump wires)
864112 Contact pin male MX150L 0.32-0.82 mm² (22 - 18 AWG) HIC A & HIC B
864120 Connector housing 12-pole MX150L HIC A / B connector
864122 Connector housing 16-pole MX150L HIC A / B connector
864130 Sealing pin MX150L HIC A / B connector, for holes without a pin
864140 Connector housing 3-pole X3 connector
864160 Connector pin female type XII 1.31-3.31 mm² X3 connector
864170 Cable clamp X3 connector
864190 Wire entry seals 3-pole X3 connector

All general inspection, maintenance and repair has to be carried out e.g. in accordance with relevant Advisory Circular AC 43.13 from FAA. This Manual "Advisory Circular" AC describes maintenance methods, techniques and practice. These are recognized and authorized for inspection and repairs in non-pressurized areas for which there are no separate maintenance and repair instructions.

SERVICE INSTRUCTION

Operation - related information
Pos. Description Part no.
1 Connector housing 16-pole 864122
2 Connector housing 12-pole 864120
3 Contact pin 1.31-2.06 mm² (16 - 14 AWG) 864112
4 Contact pin 0.21-0.82 mm² (22 - 18 AWG) 864110
5 Sealing pin MX150L 864130
6 Connector housing 3-pole 864140
7 Wire entry seal 3-pole 864190
8 Cable clamp 864170
9 Contact pin (socket) 864160

NOTE: The HIC A connector allows powering ECU Lane A and Main fuel pump.
NOTE: The HIC B connector allows powering ECU Lane B and AUX fuel pump.
NOTE: The X3 connector allows connection to airframe bus.