Kenworth Specialty Products 2010 Heavy Duty Catalog

TRUCK GAUGES AND TOOLS Heavy Duty Turntables
Stainless Steel
Specially constructed turntables utilizing stainless steel. These turntables are perfect for use where rust & corrosion are a problem. May be used on the floor or in racks and pits. Can be ordered with optional pointer. Sold in pairs.

Aluminum
These Heavy Duty Aluminum Turntables are 65% lighter vs. comparable steel turntables that can weigh 110 lbs each. They make it possible to move you heavy duty alignment system from bay to bay or even site to site. Can be ordered with optional pointer (shown). Sold in pairs.

Mild Steel
These heavy duty turntables are perfect for normal usage. They come equipped with secure locking pins that are easy to use. For floor, racks or pits. Can be ordered with optional pointer. Sold in pairs.

Heavy Duty Turntables (pair)
Full floating with enclosed ball bearings. Large, easy to read dial is quickly adjusted to zero. Pins are easy to remove and lock plates securely. Maybe be used as portable floor units or on racks and pits. Sold in pairs.

Truck Front Slip Plate Set (pair)
This slip plate set is used in conjunction with the 99515 (see below) toe gauge. Made of steel, these slip plates allow the tire to move freely while the technician sets the toe. Sold in pairs.

Tire Mating Square
This tool checks for variance in dual tire mating. Right and left tires should not vary more than 1/2” in diameter. Compare tires by placing the long arm against the side wall and the short arm against the tread.

Kenworth spare parts catalog

Kenworth spare parts catalog.rar (578.6MB) Download
Kenworth Replacement Parts Catalog.pdf (8MB) Download

Truck Tandem Alignment Systems
Steel Wheels
This is a simple method for tracking the rear dual tandems on trucks and tractors. It includes the 91896 “U” Bolt Extensions, a pair of Lo Profile Extension Bars (91877) and a pair of 91888 Tandem Trailer Trackers. With this system the technician can easily check the A and D distances along with the B and C distances (diagram right) to see if the tandems are tracking correctly.

Aluminum Wheels
The 91990 is a simple method for tracking the rear dual tandems on trucks and tractors. It includes the 91896 “U” Bolt Extensions, a pair of Lo Profile Extension Bars (91877) and 91890 Tandem Trailer Tracker Set for Aluminum Wheels. With this system the technician can easily check the A and D distances along with the B and C distances (diagram right) to see if the tandems are tracking correctly.

Kenworth 2010 Heavy Duty Catalog

Kenworth 2010 Heavy Duty Catalog For Free

Size 2.1MB
Page 20 Pages
Download the file...