See what your SmartCamera can do for you
Balances privacy and clarity
by automatically turning off when family members are around and on again when the house is empty.
Helps you check in with real-time
conversations through your mobile device and SmartCamera.
Provides a full view of home
by letting you pan and tilt to view images from the mobile app.
Keeps you informed
with notifications for anything that requires your attention or for the moments that matter.
Pick a view from any angle
You can use the dual stand/mount for both placing or wall-mounting your SmartCamera. Once mounted, you can angle the camera to change the field of view.
How to mount your SmartCamera Comment installer votre SmartCamera
- Attach the mount: Attach the dual mount/stand to the back of the SmartCamera and plug it in so you can test the view in the next step.
- Test view: Hold the camera up to the place you’d like to mount it and check the view on the ecobee app. You can adjust the view after mounting.
- Drill hole: Use a 3/16” drill bit to drill a hole where you will mount the camera.
- Screw in anchor: Screw the plastic anchor into the wall and ensure it’s flush.
- Fasten the screw: Fasten the mounting screw into the anchor until there’s a little amount of space between it and the anchor.
- Hang the mount on the screw: Remove the mount from the camera and hang it on the screw. If it feels too loose, adjust the screw until it’s secure.
- Attach the camera to the mount: Attach the camera to the mount and make sure it’s secure.
- You’re all set: Open the ecobee app to check the camera’s view and adjust it anyway you’d like.