Claas CROP TIGER 30 Operator's Manual

Claas CROP TIGER 30 Operator's Manual
Claas CROP TIGER 30 PDF Manual

How to use this manual
This operator's manual is primarily intended for the machine operator Claas CROP TIGER 30 and provides information on the use, adjustment and operation of the machine. Provided all instructions regarding proper maintenance and operation of your machine are followed, you can count on many years of reliable service.

Please have your authorised CLAAS dealer carry out regular inspections. Failure to perform maintenance or incorrect operation lead to a reduction in performance and a loss of time. If you use the latest expertise and experience that went into this machine, it will render you consistently excellent service. There is a separate operator's manual for front attachments and hitched devices.

Texts and figures
Pictures and graphics are neutral. Differences are pointed out by notes beneath the figure. Texts are short and not machine-specific as far as possible. Differences are pointed out by intermediate headings. Different types of texts can easily be distinguished from one another by their formats. The following formats are distinguished:

Document structure based on subassemblies
As far as the contents permit, the chapters of this manual are structured according to subassemblies. The structure of these subassemblies is the same in all chapters. Different product groups have different document structures based on subassemblies. CLAAS always takes care to keep these document structures based on subassemblies identical in any documents.

Search and find
The wanted subject can easily be found with the recurring subassembly structure, using the table of contents or the header line of this manual. In addition, the index of this manual is a useful tool for locating a specific subject. The index can be found on the last pages of this manual.

CLAAS CROP Tiger Overview of machine front and left side

  Destination
1 Front attachment
2 Feeder unit
3 Operator's platform
4 Ladder to the operator's platform
5 Grain tank loader
6 Grain tank
7 Grain tank unloading tube
8 Drive axle
9 Rear axle
10 Side flap of main drive / fuel filler neck

CLAAS CROP Tiger Overview of machine front and right side

  Designation
1 Diesel engine
2 Rotary chaff screen
3 Tailgate
4 Drives side flaps
5 Rear hood

CLAAS CROP Tiger Specifications
Technical data, dimensions and weights are given as an indication only. CLAAS reserves the right to make changes subsequently as technical developments continue. Responsibility for errors or omissions not accepted.

Road traffic regulations
The details of the road vehicle regulations in different countries may differ. In the event of discrepancies between the instructions provided by the manufacturer and the traffic regulations of the relevant countries, the traffic regulations of the countries concerned apply. The following information applies to the Federal
Republic of Germany.

Modifications to the machine
If parts of the machine, whose properties are specified, are modified or fitted retroactively, and the operation of them can cause a danger to other road users, then the operating licence (individual operating licence) and the certificate of exemption expire.

0 comments

Leave a Reply

Your email address will not be published.Required fields are marked *