Perkins 2206-E13 Service Manual

Perkins 2206-E13 Service Manual
Perkins 2206-E13 Industrial Engine Service Manual

Perkins recommends using a sampling valve in order to obtain oil samples. The quality and the consistency of the samples are better when a sampling valve is used. The location of the sampling valve allows oil that is flowing under pressure to be obtained during normal engine operation.

Perkins 2206-E13 Operation and Maintenance Manual
Operating your engine when the oil level is above the “High” mark could cause your crankshaft to dip into the oil. The air bubbles created from the crankshaft dipping into the oil reduces the oil’s lubricating characteristics and could result in the loss of power.

The condition of the engine lubricating oil may be checked at regular intervals as part of a preventive maintenance program. Perkins include an oil sampling valve (1) as an option. The oil sampling valve (if equipped) is included in order to regularly sample the engine lubricating oil.

Perkins 2206-E13 Visual Inspection
Visually check the condition of all gauges, sensors and wiring. Look for wiring and components that are loose, broken, or damaged. Damaged wiring or components should be repaired or replaced immediately.

Perkins 2206-E13 Severe Service Application Check
Severe service is the application of an engine that exceeds the current published standards for that engine. Perkins maintains standards for the following engine parameters:

  1. Performance such as power range, speed range, and fuel consumption
  2. Fuel quality
  3. Operational Altitude
  4. Maintenance intervals
  5. Oil selection and maintenance
  6. Coolant type and maintenance
  7. Environmental qualities
  8. Installation
  9. The temperature of the fluid in the engine

Refer to the standards for the engine or consult your Perkins dealer or your Perkins distributor in order to determine if the engine is operating within the defined parameters. Severe service operation can accelerate component wear. Engines that operate under severe conditions may need more frequent maintenance intervals in order to ensure maximum reliability and retention of full service life.

Due to individual applications, it is not possible to identify all of the factors which can contribute to severe service operation. Consult your Perkins dealer or your Perkins distributor for the unique maintenance that is necessary for the engine. The operating environment, incorrect operating procedures and incorrect maintenance procedures can be factors which contribute to a severe service application.

0 comments

Leave a Reply

Your email address will not be published.Required fields are marked *