You are now the proud owner of KUBOTA L235/L275. This tractor is a product of Kubota quality engineering and manufacturing, it is made of the finest materials and under rigid quality control system.It will give you long, satisfactory service. To obtain the best use of your tractor, please read this manual carefuliy. It will help you become familiar with the operation of the tractor and contains many helpful hintsabout tractor maintenance, It is Kubota's policy to utilize as quickly as possible every advance in our research. The immediate useof new techniques in the manufacture of products may cause some small parts of this manual to be outdated, Kubota distributors and dealers will have the most upto-date informations. Please do not hesitate to consult with them.
SPECIFICATIONS OF IMPLEMENT LIMITATIONS
The Kubota L235/L275 tractors have been thoroughly tested for proper performance with implements sold or approved by KUBOTA. Use with implements which exceed the maximum specifications listed below, or which are otherwise unfit for use with the Kubota L235/ L275 tractors may result in malfunctions or failures of the tractor, damage to other property and injury to the operator or others. [Any malfunctions or failures of the tractor resulting from use with improper implements are not covered by the warranty.]
Key Switch
Inserting the key and turning it one click to the right, closes the electrical circuit and lights up the engine oil pressure lamp (RED). Depress the clutch pedal to disengage the clutch. Next, turning the key left activates the glow plug (preheating coil), proceeding to preheat the combustion chamber. After the glow plug lamp has turned red and that the engine has been preheated completely, turn the key switch right and the cell starter will start to rotate and the engine should start. Release the key switch and it will return to the ON position.
Engine Oil Pressure Lamp
The oil pressure lamp will glow red when the starter switc'is turned on. This indicates the light and electrical wiring are functioning properly. The light should go out after engine starts. If light remains on, stop engine and determine cause.
Battery Charge Lamp
The battery charge lamp will glow red when the main switch is turned on and should go out as engine starts. If the lamp continues to glow above idle speeds, the battery is being discharged, indicating the electrical system should be checked.
Main Gear Shift Lever & Hi-Lo Gear Shift Lever. Main gear shift lever pattern is in the form of an "H." Hi-Lo gear shift lever moves two stages, "High" and Shuttle lever "Low." gear By shift combination lever shift, lever eight speeds and and use the are of Hi obtained the -Lomain gear.
Shift Shuttle the shuttle Lever lever forward to obtain forward speeds and shift it backward to obtain reverse speeds. For your safety, the highest reverse speed (8th reverse) is restricted with interlock device. Or at the 8th reverse speed (high range in Hi-Lo gear shift position and the 4th in main gear shift position) either shuttle lever or main gear shift lever will return to neutral position when attempting to shift into 8th reverse.