PRE-START SAFETY
Many failures that occur during machine operation or servicing result from neglecting fundamental safety precautions. The following safety precautions are given to prevent such failures, but they are only a part of what you must follow. Read, understand and follow all safety precautions found in this manual and on the machine thoroughly before operating the machine.
OBSERVE SAFETY PRECAUTIONS
Follow all safety rules, precautions, and operating procedures.If there are other personnel and flagmen working in the area, have them observe the specified signs.
WEAR PROTECTIVE CLOTHING
Wear well fitting safety shoes, hard hat, and working clothes, and put on protective glasses, face shield, ear protection and gloves. When necessary, wear reflective vest.
READ and UNDERSTAND THE OPERATORS MANUAL
Before operating the machine, read and understand this operators manual thoroughly inorder to use the mchine effectively and safely. kobelco excavator service manual pdf,kobelco sk200 service manual free download,kobelco 135sr workshop manual,kobelco welding handbook pdf,kobelco sk07 manual,kobelco 140 service manual,kobelco sk210lc service manual,kobelco compressor,kobelco mini excavators,kobelco compresssors,kobelco ss mini excavator,kobelco 210.
KEEP OPERATORS MANUAL IN MACHINE CAB
Keep this manual in the specified storage area located behind the operators seat for quick reference. Should the operators manual become lost or damaged, contact an authorized KOBELCO distributor to order the operators Manual.
HOW TO HANDLE LIFE HAMMER
A life hammer is provided on the right side of cab. In case of emergency, take the life hammer, break the cab glass, and escape from the cab. In addition, the life hammer is equipped with a cutter on the lever side to cut the seat belt, etc.
PREPARE FOR EMERGENCIES
Have a fire extinguisher and first aid kit ready for emergencies. Know how to operate the fire extinguisher and know where the First Aid Kit is located for easy access in case of emergency.
ENSURE SAFETY AT THE WORK SITE
Know the work area! Before operating the machine, carefully survey and record the land and worksite features to prevent the machine from falling or the soil from caving in.
PERFORM PRE-START INSPECTION
Before starting the machine, perform a PRESTART inspection of the machine. If any problems are found, repair or replace defective components immediately. DO NOT OPERATE THE MACHINE until all problem areas are properly repaired. Always keep the windshield, working lamps, and mirrors clean for good visibility.
ENGAGE SAFETY LOCK LEVER BEFORE LEAVING MACHINE
Before leaving the operator’s seat, move the safety lock lever to the “LOCKED” (Up) position. This will not allow operation of any hydraulic controls should they be accidentally moved. If the lever is not set to the “LOCKED” position and hydraulic controls are touched accidentally, the machine may move suddenly resulting in serious injury. Also before leaving the machine, lower the bucket to the ground, place the safety lock lever in the “LOCKED” (Up) position, stop the engine and remove the starter switch key.
MOUNTING & DISMOUNTING MACHINE
When getting on and off the machine, always maintain three point contact by using the handrails and step. Inspect and clean handrails, step, and mounting parts. Remove slippery materials, such as lubricants, and mud. Always place the cab door entrance parallel to the tracks before stopping the engine for dismounting.
USE THE PROPER OPTIONAL ATTACHMENT
Use only optional attachments designed for and approved by KOBELCO. Read, understand and follow all instructions in the manual accompanying the optional attachment. Use of any optional attachment not approved by KOBELCO in writing, can cause serious injury to personnel, damage to the machine and its components and shorten the life of the machine. Contact an authorized KOBELCO Dealer for optional attachments available for the machine.
OPERATING ON INCLINES OR SLOPES
Operation of this machine on an incline or slop may cause the machine to become unstable or unbalanced. Work up and down inclines or slopes never across. Never Swing or turn machine around on slopes. Build a level area for the machine to operate. Operate controls carefully to prevent sud den movements which may cause the machine to slide or tip over. Use a flagman to direct the operator.