Honeywell HPA5300B Insight HEPA Air Purifier User Manual

The Honeywell InSight™ Series Air Purifier delivers powerful HEPA filtration and features a cutting-edge design that provides valuable information from a distance.
REPLACEMENT FILTERS Honeywell HPA5300B Insight HEPA Air Purifier
To ensure stated product performance, use only Certified Honeywell Replacement Filters. You can purchase Genuine Honeywell Filters at the retailer where you purchased your air purifier or order directly from www.HoneywellPluggedIn.com.

VOCs are gases that are emitted from certain household cleaning, home improvement, and even common home decor products. These gases can be harmful or irritating if inhaled. When the Auto mode is activated, the air purifier will automatically operate at the appropriate cleaning level to reduce the VOCs that are detected in the room. To select this mode, tap the Auto button and the icon will illuminate on the InSight Display to indicate the setting has been activated. NOTE: Upon start up, the unit may take a few minutes to calibrate and measure the air quality. During this time, the Air Quality Indicator will pulse between green, yellow, and red until the air quality is determined. When the appropriate reading is determined, the indicator will then remain a solid color.

CONTROL PANEL DIMMER
The Dimmer option allows you to adjust the brightness of the LEDs on the control panel and the InSight Display. This is helpful if you are looking to adjust the brightness depending on the time of day that the unit will be used. To adjust brightness, tap the Dimmer button once to dim the lights to LOW. Tap the button twice and it will shut the lights OFF. Please note that the dimmer button will remain on at 20% illumination and will not completely shut off so that the unit can be located in a dark room. All of the the other lights will shut off. Tap the Dimmer button a third time to return the brightness to HIGH.

FILTER CHECK/RESET
These air purifier models each have two electronic filter checks to remind you when it is time to replace the Pre-Filter, Optional Enhanced Odor and VOC Filter(s), and HEPA Filter(s) based on the air purifier’s hours of use. When it is time to replace the filters, one of the filter icon lights will illuminate above the Filter Check/Reset indicator light to identify which filter needs to be replaced at that time. For more detailed information, see the next section

READ AND SAVE THESE SAFETY INSTRUCTIONS BEFORE USING THIS AIR PURIFIER
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1. Read all instructions before operating the air purifier.
2. Place air purifier where it is not easily knocked over by persons in the household.
3. ALWAYS turn the air purifier controls to the OFF position and unplug from the wall outlet when not in use.
4. To disconnect the air purifier, make sure the unit is powered OFF then grip the plug and pull it from the wall outlet. NEVER pull by the cord.
5. DO NOT use any product with a damaged cord or plug or if product malfunctions, is dropped or damaged in any manner. Keep the cord away from heated surfaces.
6. DO NOT use air purifier outdoors.
7. DO NOT use air purifier unless it is fully assembled.
8. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature.