Crown Forklift 4000 SERiES PARKING BRAKE ON
Press the end of the parking brake rocker switch nearest the seat to apply the parking brake. Always put the parking brake on when you leave the truck. The alarm will sound if the brake is not applied.
Crown Forklift 4000 SERiES POWER DISCONNECT
Pull the Power Disconnect handle up to disconnect the battery and cut power to the truck. Always use the Power Disconnect if the truck isn't working right. Don't use the truck, and report the problem to your supervisor immediately. Push the Power Disconnect handle down, and turn the key switch to OFF and back to TEST, to reconnect the battery.
Crown Forklift 4000 SERiES HYDRAULIC LEVER OPERATION
Pull a lever toward you, away from the mast, and you'll get the action shown by the symbol in the top of the lever. Push the lever away from you, toward the mast, and you'll get the opposite action. The farther you move the lever from neutral, the faster the action will be.
Crown Forklift HYDRAULIC OPERATIONS CAN AFFECT STABILITY
Capacities shown on your capacity plate are for loads that are centered and level. Be extra careful when tilting a load. (This also applies to accessories or attachments your truck may have, such as sideshift, carton clamp, push-pull, etc.)
Crown Forklift 4000 SERVICE BRAKE
Step down on the brake pedal to apply the brakes. When you step down on the brake pedal you still have power to the drive motors, unless your truck has the traction cutout option.