This chapter contains product safety information for the SR-70/80 Rubber Track Loaders. Read and understand all product safety information before attempting to service any Rubber Track Loader. The person(s) in charge of servicing a Rubber Track Loader may be unfamiliar with many of the systems on the machine. This makes it especially important to use caution when performing service tasks. Familiarize yourself with the affected system(s) and components before attempting any type of maintenance or service. asv sr70 specs,asv sr70 parts manual,asv sr70 for sale,ASV SR70 Track Loader Service Manual,ASV SR70 Track Loader Repair Manual,ASV SR70 Track Loader workshop Manual,ASV SR70 Track Loader Maintenance Manual
ASV SR70 Protective Equipment
Always wear appropriate protective equipment for working conditions when working on or around a Rubber Track Loader. Wear hard hats, protective glasses, safety shoes and any other equipment necessary to ensure your safety and the safety of others as you work. In particular, wear protective glasses when pounding on any part of the machine or its work tool with a hammer or sledge. Do not wear loose clothing or jewelry that can catch on components and cause injury. If welding is required, use welding gloves, helmet (UV eye protection), apron, boots and any other protective clothing necessary to ensure your safety and the safety of others while welding. Avoid wearing flammable or heat sensitive clothing while performing tasks that involve welding.
ASV SR70 Entering and Exiting
Always use steps and handholds when entering or exiting a Rubber Track Loader. Clean any mud or debris from steps or work platforms before using them. Always face the machine when using steps and handholds. When it is not possible to use the designed entry/exit system, utilize ladders, scaffolds, or work platforms to safely gain access to the machine.
ASV SR70 Lifting
Use a hoist when lifting components that weigh 23 kg (50 Ib) or more, to avoid back injury. Make sure all chains, hooks, slings, etc., are in good condition and are of the correct capacity. Be sure hooks are positioned correctly and equipped with a spring latch. Lifting eyes are not to be side loaded during a lifting operation.
ASV SR70 Hot Fluids and Components
Stay clear of hot components and system fluids of the engine, exhaust, radiator/oil cooler and hydraulic lines/tubes. Also, use caution when removing fill caps, breathers and plugs on the machine. Hold a rag over the cap or plug to prevent being sprayed or splashed by liquids under pressure. Be especially careful if the machine has been operated recently, fluids may still be hot. To ensure your safety, allow the machine to cool before attempting any service procedure that involves hot fluids or components.
ASV SR70 Corrosion Inhibitor
Corrosion inhibitor contains alkali. Avoid contact with eyes. Avoid prolonged or repeated contact with skin. Do not take internally. In case of contact, wash skin immediately with soap and water. For eyes, flush with large amounts of water for at least 15 minutes. Call Physician. Keep out of reach of children.
ASV SR70 Batteries
Do not smoke when inspecting the battery electrolyte level. Never disconnect any charging unit circuit or battery circuit cable from the battery when the charging unit is operating. A spark can cause an explosion from the flammable vapor mixture of hydrogen and oxygen that is released from the electrolyte through the battery outlets. Do not let electrolyte solution make contact with skin or eyes. Electrolyte solution is an acid. In case of contact, immediately wash skin with soap and water. For eyes, flush with large amounts of water for at least 15 minutes. Call Physician. Keep out of reach of children.