This manual contains safety, operation, maintenance, and adjustment information. The procedures are designed to provide the best performance of the machine in an effective and economical way. In order to obtain it, remember the next basic rules.
- This manual should be stored in the operator’s compartment of any machine where this attachment is used.
- Before inspection, maintenance, or operating the VTS, read and understand this manual completely.
- Since all of the explanations in this manual may not be thoroughly understood at first, repeat reading it until abilities as an operator are obtained and developed for proper operation.
- Further abilities as an operator outside of descriptions in this manual can be obtained from experience during normal operations and under proper supervision.
- Because of continuing improvement and advancement of product design, the shape of the attachment in the illustrations may be partly different from your machine. Whenever a question arises regarding your machine, or this publication, please consult your local Loegering dealer or Loegering Mfg. at 701-347-5441 for the latest information.
Versatile Track System User Manual
Always provide the serial number of your VTS when ordering parts, requesting service, requesting warranty, or any other information. The serial number plate is located on top of the tunnel near the rear hub. Please record the serial number in the space provided and on the warranty registration card.
OBSERVE THE BASICS FOR SAFE AND EFFECTIVE OPERATION.
The operator’s knowledge, skills, and experience are the most important to utilize the machine and VTS. Therefore, be sure to understand operation procedures and to take necessary training.
OPERATOR SHOULD BE QUALIFIED.
Only qualified operators should operate the machine, and those operators should only do so when physically and mentally alert. The operator should be familiar with the hazards and necessary safety measures unique to the operation of VTS.
READ AND UNDERSTAND THE INSTRUCTIONS AND WARNINGS.
This manual, plates, and labels on the machine contain necessary instructions and warnings for safe operation. Read and understand all safety instructions and warnings, failure to do so can result in injury or death. Loegering will be glad to answer any questions. If the manual, plate, or label is missing or damaged, contact Loegering for a replacement.
PERFORM MAINTENANCE CAREFULLY.
Maintenance work can be hazardous if not done in a careful manner. All personnel should realize the hazards and strictly follow safe practices. Before performing any maintenance or repair work, consult the instruction manual.