Peugeot RCZ Dag Refuel as soon as possible to avoid running out of fuel. This warning lamp will come on every time the ignition is switched on, until a suffi cient addition of fuel is made. Fuel tank capacity: approximately 55 litres. Never continue to drive until you run out of fuel, as this could damage the emission control and injection systems.
Peugeot LIGHTING RHEOSTAT. The analogue clock, located between the central vents of the dashboard, does not have an adjustment button. To set the time, refer to the section relating to your multifunction screen's confi guration menu. The clock is synchronised with the multifunction screen time; once the the setting has been confi rmed on the multifunction screen, the hands will turn to synchronise with the screen, and each time the ignition is switched on.
Peugeot RCZ pdf Manual
With the Peugeot Connect Sound switched on, once this menu has been selected you can confi gure your Bluetooth hands-free system (pairing), consult the various telephone directories (calls log, services...) and manage your communications (pick up, hang up, call waiting, secret mode...). For further details concerning the "Telephone" application, refer to the Peugeot Connect Sound part of the "Audio and Telematics" section.
Peugeot RCZ Storing the position of the screen
The system has four pre-set positions in its memory. Each time the screen is closed, the system stores the last position of the screen. Each time the screen is re-opened, the system returns the screen to the pre-set position closest to that stored.
Peugeot RCZ AIR INTAKE
The air circulating in the passenger compartment is fi ltered and originates either from the outside via the grille located at the base of the windscreen or from the inside in air recirculation mode.
Peugeot AIR FLOW PATHS
The incoming air follows various routes depending on the controls selected by the driver:
- direct arrival in the passenger compartment (air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air conditioning).
The temperature control enables you to obtain the level of comfort required by mixing the air of the various circuits. The air distribution control enables you to diffuse the air in the passenger compartment combining several air vents. The air fl ow control enables you to increase or reduce the speed of the ventilation blower.