2014 KTM 250-300 EXC XC-W Six Days Repair manual

2014 KTM 250-300 EXC XC-W Six Days Repair manual
2014 KTM 250-300 EXC XC-W Six Days Service manual

This vehicle can only fulfill the demands placed on it in the long run if the specified service work is performed regularly by qualified experts. The repair manual was written to correspond to the most current state of this model series. 2014 KTM 250-300 EXC XC-W Six Days Service manual We reserve the right to make changes in the interest of technical advancement without, at the same time, updating this repair manual. We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop are not specified here. It is assumed that repair work will be performed by a fully trained mechanic.

Ktm 250 exc-f repair manual
All specifications are non-binding. KTM Sportmotorcycle AG specifically reserves the right to modify or delete technical specifications, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery options, deviations from illustrations and descriptions, as well as misprints and other errors. The models portrayed partly contain special equipment that does not belong to the regular scope of supply.

2014 ktm 300 xc-w service manual
The rebound damping is located in the right fork leg (red adjusting screw). The compression damping is located in the left fork leg (white adjusting screw). Grooves are milled into the side of the upper end of the fork legs. The second milled groove (from the top) must be flush with the top edge of the upper triple clamp.

2014 ktm 300 xc-w Checks and maintenance steps for winter operation, If the motorcycle is used in the winter, salt can be expected on the roads. Precautions need to be taken against road salt corrosion. If the vehicle was operated in road salt, clean it with cold water after riding. Warm water would enhance the corrosive effects of salt.

0 comments

Leave a Reply

Your email address will not be published.Required fields are marked *