KTM 450 SX-F Read this Repair Manual carefully and thoroughly before beginning work. It contains useful information and tips that will help you repair and maintain your vehicle. This manual assumes that the necessary special KTM tools and KTM workplace and workshop equipment are available.
2013 KTM 450 SX-F During assembly, non-reusable parts (e.g. self-locking screws and nuts, seals and seal rings, 0-rings, pins, lock washers) must be replaced by new parts. In some instances, a thread locker (e.g. Loctite®) is required. The manufacturer instructions for use must be followed. After disassembly, clean the parts that are to be reused and check them for damage and wear. Change damaged or worn parts. After you complete the repair or service work, check the operating safety of the vehicle.
KTM 450 XC-F The figures contained in the manual may depict special equipment. In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not always necessary to disassemble the component to perform the activity in question. Please follow the instructions in the text.
KTM 450 Service Manual
Only use spare parts and accessories approved and/or recommended by KTM. KTM accepts no liability for other products and any resulting damage or loss. The current KTM PowerParts for your vehicle can be found on the KTM website.
The vehicle may be damaged by incorrect procedure when parking. Significant damage may be caused if the vehicle rolls away or falls over. The components for parking the vehicle are designed only for the weight of the vehicle.
2013 KTM Service Repair Manual
|2013 KTM 350 SX-F XC-F Service Repair Manual||Download|
|2013 KTM 350 EXC-F XCF-W Six Days Service Repair Manual||Download|
|2013 KTM 250 XCF-W EXC-F Repair Manual||Download|
|2013 KTM 250 SX-F XC-F Service Repair Manual||Download|
KTM 450 SX-F XC-F For Free