Thank You for Purchasing a John Deere Product We appreciate having you as a customer and wish you many years of safe and satisfied use of your machine. The Operator's Manual Your operator's manual is for your protection. READ IT. Keep it handy for reference. Know what you are doing before you begin assembly of the unit. Proper preparation and upkeep go hand-in-hand with satisfactory performance of the saw and safety. This manual should be considered a permanent part of your machine and should remain with the machine if you sell it. John Deere CS81 ut10924 CS81 ut10925 Users Manual,John Deere CS81 ut10924 CS81 ut10925 owner's Manual,john deere cs81 specs.john deere cs81 chainsaw for sale.efco 181 chainsaw specs.efco 181,efco chainsaw,John Deere CS81 Users Manual,John Deere ut10924 Users Manual,John Deere CS81 Users Manual,John Deere ut10925 Users Manual
State and Local Requirements
Your saw is equipped with a temperature limiting muffler, a spark arresting screen and dual bucking spikes in order to comply with the requirements of SAE Recommended Practice J335 and California Codes 4442 and 4443.All national forest land and land managed by the states of California, Maine, Washington, and Oregon require internal combustion engines to be equipped with a spark arrester screen by law. Other states and federal agencies are enacting similar regulations.
John Deere Chainshaw User Manual
If you operate a chain saw in a state or locale where such regulations exist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of a law. Spark arrester maintenance is described in the Maintenance-Spark Arresting Muffler Section of the manual.
State and Local Requirements
Your saw is equipped with a temperature limiting muffler, a spark arresting screen and dual bucking spikes in order to comply with the requirements of SAE Recommended Practice J335 and California Codes 4442 and 4443.All national forest land and land managed by the states of California, Maine, Washington, and Oregon require internal combustion engines to be equipped with a spark arrester screen by law. Other states and federal agencies are enacting similar regulations.
John Deere Chainshaw Maintenance Manual
Never operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released. If the saw chain moves at idle speed, the carburetor may need adjusting, see Operation-Carburetor Adjusting Section. If the saw chain still moves at idle speed after adjustment has been made, contact a John Deere Servicing Dealer for adjustment and discontinue use until the repair is made.
Low Kickback Saw Chain
The rakers (depth gauges) ahead of each cutter can minimize the force of a kickback reaction by preventing the cutters from digging in too deeply at the kickback zone. Only use replacement chain that is equivalent to original chain or has been certified as low kickback chain per ANSI B175.1. Low kickback saw chain is chain that has met the kickback performance requirements of ANSI B175.1 - 1991 (American National Standard for Power Tools - Gasoline-Powered Chain Saws-Safety Requirements) when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI B175.1- 1991.
Guide Bars
Generally, guide bars with small radius tips have somewhat lower kickback potentials. John Deere gasoline saws meet the kickback-reduction requirements of ANSI B175.1 without requiring small radius tip bars. When making a replacement be sure to order one of the JOHN DEERE bars listed for your saw in this operator's manual. The proper size SAFE-T-TIP® nose guard comes installed on the bar. Use only guide bars that have a provision for mounting the SAFE-T-TIP