BEFORE ASSEMBLY
Please read through these instructions before assembly. Your thorough understanding of the assembly will enable you to build the kit without difficulty. Check the components in the kit prior to your startings the assembly. Any claims for replacements or refunds for the model in the process of assembly will not be accepted .
THINGS NEEDED BESIDES THE KIT
Two types of radio control sets are on the market, the stick type and the steering wheel type. Choose which ever you like.
HOW TO CHECK YOUR RADIO SYSTEM
- Install the batteries into both -the transmitter and receiver. If your radio is a rechargeable system, charge it as outlined in the manual that came with your set.
- Unravel the receiver antenna and plug the servo and battery connectors into the receiver.
- Extend the transmitter antenna.
- Turn On the power switch of the transmitter.
- Turn On the power switch of thp receiver.
- Set the small trim levers to the center position and make sure that both main control sticks are also centered.
- Move both main control sticks slowly through their full travel. The servo horns should move in proportion to the movement of y
- When trim levers and sticks are at their neutral positions, the servo horns should be centered. You may now turn off the transmitter, then the receiver and unplug the servos and battery from the receiver.
Transmitter
This is the part of the system that you hold in your hands to control the model . Information is sent to the receiver and servos via radios waves.
Receiver
Receives the radio signals from the transmitter and sends them to the appropriate servo.
Small Parts
The small parts to be used such as screws, nuts, washers are illustrated in the actual size on the attached sheet "The List of Small Parts" . Pick up the correct ones referring the size, shape , and the assembly number.
PAINTING OF BODY
The body of this model is made of policarbonate, transparent plastic resin, formed into the body shape. When painting the body, you can finish it more beautiful by washing it well with neutral detergent, drying it thoroughly with care not to put any fat or stain on the surface, and painting inside the body. When finishing it in one color, two or three coats of the color all over the inside are enough. When you would apply some color scheme, use masking tape such as the Micron Tape to separate areas of different color, and apply the darkest color first, and lastly * the lightest color all over.