Precautions during the operation
This label contains instructions referring to how to handle the tractor in a secure way and avoid any possibility to have an accident. So please assure that these instructions are strictly observed before starting up the tractor.
When operating the tractor, use protective clothing according to the work conditions and accomplishing with the regulation provisions of your country. The operator’s working clothing should have its sleeves and legs sufficiently tight to avoid the possibility of being caught in the tractor levers. The operator should also wear protecting glasses, ear protectors and a mask against dust as well as security shoes, if the operation regulation of the firm requests so. Clark CTE 7 Operator's Manual, Clark CTE 12 Operator's Manual, Clark CTE 20 Operator's Manual,Clark CTE 7 User Manual, Clark CTE 12 User Manual, Clark CTE 20 User Manual,Clark CTE 7 Service Manual, Clark CTE 12 Service Manual, Clark CTE 20 Service Manual.
GUIDE TO A PERIODIC MAINTENANCE
Before the delivery of the new tractor, the Concessionaire carries out a pre-delivery check and an adjusting service specified by the Factory, with the purpose that the tractor renders the wished services. On the following tables, the required maintenance services to get a satisfactory operation of the lifting tractor are indicated. These services should be carried out by a Concessionaire or an Official CLARK Service.
MAINTENANCE AND CARE OF THE BATTERIES
Observe the operation instructions of the battery manufacturer and of the battery charger manufacturer. These charging operations should exclusively be carried out by specialised staff. The use of protective glasses and gloves is recommended. The room should be well ventilated. Smoking is forbidden, as the gas that is given off is inflammable.
LOW VOLTAGE BLOCKING SYSTEM
When the last indicating light of the hour-meter indicator of the battery lights up only 20 % of the battery charge remains, so that it should be charged. If you continue operating without charging it, you will only be able to move the tractor to remove it.
BATTERY CONNECTOR
It is used to feed the C.A. engines, auxiliary circuits, etc... by means of the batteries. If an abnormal situation happens, it should be disconnected immediately. It should be disconnected before changing or inspecting the fuses in other electric components.