2006-2009 Acura CSX Service Manual

2006-2009 Acura CSX Service Manual
Acura CSX Service Manual

Acura CSX PDF Manual This manual is divided into multiple sections. The first page of each section is marked with a black tab that lines up with its corresponding thumb index tab on this page and the back cover. You can quickly find the first page of each section without looking through a full table of contents. The symbols printed at the top corner of each page can also be used as a quick reference system.
Each section includes:

  1. Parts disassembly sequence.
  2. Bolt torques and thread sizes.
  3. Page references to descriptions in text.
  4. Disassembly/assembly procedures and tools.
  5. Inspection.
  6. Testing/troubleshooting.
  7. Repair.
  8. Adjustments.

Acura CSX Service Manual  All information contained in this manual is based on the latest product information available at the time of printing. We reserve the right to make changes at anytime without notice. No part of this publication may be reproduced, or stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. This includes text, figures, and tables.

Vehicle Lift:

  1. Position the lift blocks (A) under the vehicle’s front support points (B) and rear support points (C).
  2. Raise the lift a few inches, and rock the vehicle gently to be sure it is firmly supported.
  3. Raise the lift to its full height, and inspect the vehicle support points for solid contact with the lift blocks.

Safety Stands: To support the vehicle on safety stands, use the same support points as for a vehicle lift. Always use safety stands when working on or under any vehicle that is supported only by a jack.

Acura CSX To deter vehicle theft, certain major components are marked with the vehicle identification number (VIN). Original parts have self-adhesive labels. Replacement body parts have generic self-adhesive labels. These labels should not be removed. The original engine or transmission VIN plates are not transferable to the replacement engine or transmission.

Automatic Transmission
P Position
Hydraulic pressure is not applied to the clutches. Power is not transmitted to the countershaft. The countershaft is locked by the park pawl interlocking the park gear.
N Position
Engine power transmitted from the torque converter drives the mainshaft idler gear, the idler shaft idler gear, and the secondary shaft idler gear, but hydraulic pressure is not applied to the clutches. Power is not transmitted to the countershaft.
In this position, the position of the reverse selector differs according to whether the shift lever shifted from D or R:

  1. When shifted from D, the reverse selector engages with the countershaft 4th gear and the reverse selector hub, and 4th gear engages with the countershaft.
  2. When shifted from R, the reverse selector engages with the countershaft reverse gear and the reverse selector hub, and reverse gear engages with the countershaft.

0 comments

Leave a Reply

Your email address will not be published.Required fields are marked *