The model 50Z3 and 6003 excavators are self-propelled work machines. Get informed on and follow the legal regulations of your country. This machine is a versatile and powerful tool for moving earth, gravel and debris on construction sites and elsewhere. A wide range of attachments accounts for the numerous applications of the machine, among others hammer and grab applications. See chapter Fields of application, attachments for further applications. Wacker Neuson 50Z3 Track Excavator Operators Manual,Wacker Neuson 6003 Track Excavator Operators Manual,Wacker Neuson 6003 Track Excavator User Manual,Wacker Neuson 50Z3 Track Excavator User Manual
The main components of the machine are:
50Z3
- FOPS (Falling Object Protective Structure), TOPS (Tip Over Protective Structure) and ROPS (Roll Over Protective Structure) tested closed cab (standard).
- FOPS (Falling Object Protective Structure), TOPS (Tip Over Protective Structure) and ROPS (Roll Over Protective Structure) tested open cab (option).
6003
- FOPS (Falling Object Protective Structure), TOPS (Tip Over Protective Structure) and ROPS (Roll Over Protective Structure) tested closed cab (standard).
- Models 50Z3 and 6003: water-cooled Yanmar four cylinder diesel engine
- Sturdy steel sheet chassis; rubber-mounted engine
The diesel engine permanently drives the twin axial variable displacement pump whose oil flow is sent to a hydraulic motor for each track drive. The diesel engine also drives the joint gear pump for the work hydraulics. The oil flow of this pump depends on the diesel engine speed only. The indicator lights in the instrument panel of the machine ensure constant monitoring of the engine and hydraulic oil temperature, as well as of the coolant temperature and level.
Do not modify or attempt to repair the ROPS cab or ROPS structure. A bent or damaged ROPS will no longer protect the operator in the event of a tipping incident and must be replaced. Contact your Wacker Neuson dealer for instructions or clarification.
The ROPS is a special safety device designed and produced to exacting material and assembly standards for certification. Bending, heating, welding, cutting, or drilling holes in the ROPS will reduce the protection performance in a tipping incident. Fasten your seatbelt, otherwise you can be thrown around or even outside the cab and crushed. Therefore always fasten your seatbelt as you drive and work with the machine. Tighten the seatbelt before taking up work with the machine.
Fields of application, attachments
Using tools of other manufacturers, or tools which have been released for other excavator types, can reduce the machine's output and stability considerably, and can also cause damage to the machine and injuries to the operator or the staff. Always compare the weight of the tool and its maximum payload with the indications in the lift capacity table. Never exceed the maximum payload stated in the lift capacity table.