Hitachi EX1900-5 Operator's and Maintenance Manual

GENERAL PRECAUTIONS FOR CAB
Before entering the cab, thoroughly remove all dirt and/or oil from the soles of your work boots. If any controls such as a pedal is operated while with dirt and/or oil on the soles of the operator’s work boots the operator’s foot may slip off the pedal, possibly resulting in a personal accident. Don’t leave parts and/or tools lying around the operator’s seat. Store them in their specified locations. Avoid storing transparent bottles in the cab. Don’t attach any transparent type window decorations on the windowpanes as they may focus sunlight, possibly starting a fire. Refrain from listening to the radio, or using music headphones or mobile telephones in the cab while operating the machine. Keep all flammable objects and/or explosives away from the machine. Hitachi EX1900-5 Operator's Manual,Hitachi EX1900-5 Maintenance Manual,Hitachi EX1900-5 User Manual.

USE HANDHOLDS AND STEPS

• Falling is one of the major causes of personal injury.
• When you get on and off the machine, always face the machine and maintain a three-point contact with the steps and handrails.
• Do not use any controls as handholds.
• Never jump on or off the machine. Never mount or dismount a moving machine.
• Be careful of slippery conditions on platforms, steps, and handrails when leaving the machine.

ADJUST THE OPERATOR’S SEAT

• A poorly adjusted seat for either the operator or for the work at hand may quickly fatigue the operator leading to misoperations.
• The seat should be adjusted whenever changing the operator for the machine. 
• The operator should be able to fully depress the pedals and to correctly operate the control levers with his back against the seat back.
• If not, move the seat forward or backward, and check again.

FASTEN YOUR SEAT BELT

• If the machine should overturn, the operator may become injured and/or thrown from the cab. Additionally the operator may be crushed by the overturning machine, resulting in serious injury or death.
• Prior to operating the machine, thoroughly examine webbing, buckle and attaching hardware. If any item is damaged or worn, replace the seat belt or component before operating the machine.
• Be sure to remain seated with the seat belt securely fastened at all times when the machine is in operation to minimize the chance of injury from an accident.
• We recommend that the seat belt be replaced every three years regardless of its apparent condition.

MOVE AND OPERATE MACHINE SAFELY

• Bystanders can be run over.
• Take extra care not to run over bystanders. Confirm the location of bystanders before moving, swinging, or operating the machine.
• Always keep the travel alarm and horn in working condition (if equipped). It warns people when the machine starts to move.
• Use a signal person when moving, swinging, or operating the machine in congested areas. Coordinate hand signals before starting the machine.

HANDLE CHEMICAL PRODUCTS SAFELY
Direct exposure to hazardous chemicals can cause serious injury. Potentially hazardous chemicals used with your machine include such items as lubricants, coolants, paints, and adhesives. A Material Safety Data Sheet (MSDS) provides specific details on chemical products: physical and health hazards, safety procedures, and emergency response techniques. Check the MSDS before you start any job using a hazardous chemical. That way you will know exactly what the risks are and how to do the job safely. Then follow procedures and use recommended equipment. See your authorized dealer for MSDS’s (available only in English) on chemical products used with your machine.